BREMBO Prime 09.9172.11 Bremseskive til BMW 5-serie, 6-serie 324x30mm, 5, indvendigt ventileret

BREMBO Prime Brake Disc 09.9172.11 – Premium internally vented front disc for BMW 5 Series and 6 Series

The BREMBO Prime Brake Disc 09.9172.11 represents Italian engineering excellence – designed for drivers who demand performance, safety, and reliability. Manufactured by BREMBO, a world-renowned OEM supplier and racing technology leader, this high-performance internally vented brake disc delivers exceptional braking force and optimal heat dissipation under extreme driving conditions. Technical specifications include an outer diameter of 324.0 mm, a disc thickness of 30.0 mm and advanced internal ventilation channels.

The 09.9172.11 BREMBO Prime brake disc features an internally vented design with 5 mounting holes optimized for BMW applications. Made from premium cast iron with BREMBO's proprietary metallurgy, it incorporates advanced cooling vane geometry for maximum thermal efficiency. The brake disc meets strict OEM specifications and is ECE R90 approved, ensuring compliance with all European safety and quality standards for BMW 5 Series and 6 Series vehicles.

Which vehicles are compatible with the BREMBO 09.9172.11?

For which BMW 5 Series models is the BREMBO Prime 09.9172.11 brake disc suitable?

This brake disc is compatible with the following BMW 5 Series models: BMW E60 5 Series Saloon (2001–2010) and BMW E61 5 Series Touring (2004–2010) variants with a front brake disc diameter of 324mm. Confirm compatibility with your vehicle via the VIN, OEN, or PR code.

For which BMW 6 Series vehicles is the BREMBO 09.9172.11 brake disc suitable?

The following BMW 6 Series vehicles can be fitted with this brake disc: BMW E63 6 Series Coupe (2004–2010) and BMW E64 6 Series Convertible (2004–2010) variants equipped with the 324mm front brake system. Check via the VIN, OEN, or PR code whether your specific vehicle is compatible.

Installation instructions for BREMBO Prime 09.9172.11

1. Replace brake discs in pairs to ensure balanced braking performance on BMW vehicles.

2. Consult the vehicle's service manual for the specific removal sequence and torque values.

3. Remove the wheels and disconnect the brake wear sensor cable. Remove the caliper and support it to avoid tension on the brake hose.

4. Remove the old disc: Loosen the retaining screw (typically T30 Torx on BMW). If seized, apply penetrating oil.

5. Thoroughly clean the hub surface from rust and dirt, paying special attention to the centering ring area.

6. Install the new BREMBO disc and brake pads, then tighten the retaining screw and caliper bolts to specification.

7. Reconnect the brake wear sensor and press the brake pedal several times. Check brake fluid level and top up if necessary.

8. Bedding-in: Follow the vehicle manufacturer's recommendations; if none are provided, drive for at least 200 km using gentle, brief brake applications, avoiding hard braking and ABS activation during this period.

FAQ: BREMBO Prime Brake Disc 09.9172.11

Do the brake pads need to be replaced at the same time as the BREMBO brake disc 09.9172.11?

Yes, it is strongly recommended to replace brake pads together with new BREMBO brake discs. This ensures optimal surface contact, prevents premature wear, and maximises the performance benefits of the BREMBO braking system.

Is the BREMBO brake disc 09.9172.11 ventilated or solid?

This brake disc is internally vented with advanced cooling vane geometry. The sophisticated internal ventilation channels provide superior heat dissipation, making it ideal for the high-performance requirements of BMW 5 Series and 6 Series vehicles.

How should new brake discs be properly bedded in?

During the first 200 km, perform moderate braking and avoid aggressive stops or track driving. This allows the BREMBO disc's specialised friction surface to properly mate with the brake pads, ensuring optimal performance and longevity.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 324 mm with a thickness of 30 mm – specifically engineered for BMW E60, E61, E63, and E64 models requiring the larger brake disc specification for enhanced stopping power.

Is this brake disc suitable for vehicles with ABS?

Yes, the BREMBO Prime 09.9172.11 is mainly compatible with BMW vehicles equipped with ABS, DSC (Dynamic Stability Control), and other electronic brake assistance systems. The disc maintains OEM specifications for sensor compatibility.

Do I need special tools to install the BREMBO brake disc?

Standard BMW service tools are sufficient, including Torx drivers (T30 for retaining screws) and socket wrenches. A torque wrench is essential for proper installation according to BMW specifications. Some advanced systems may require additional tools or equipment.

What are the advantages of the BREMBO brake disc 09.9172.11 compared to other models?

BREMBO Prime discs offer refined metallurgy, advanced cooling vane design, and racing-derived technology. They provide better heat dissipation, reduced brake fade, and longer service life compared to low-budget aftermarket alternatives.

Can this brake disc be used for track driving or spirited driving?

No, the Brake disc BREMBO 09.9172.11 is designed to handle driving conditions on roads and is not suited for sporty driving or track use. The Max, Xtra, and Sport Lines support spirited driving while the GT Line is suited for track use.

What is the minimum thickness specification for this brake disc?

The minimum thickness for the BREMBO 09.9172.11 brake disc is given as 28.4 mm. When the disc wears to this thickness, it must be replaced to maintain safe braking performance.

Does this brake disc come with a warranty?

Yes, BREMBO Prime brake discs typically come with a manufacturer's warranty covering material and manufacturing defects. The specific warranty terms may vary by region.